Go back

4.0MK-80/50-400

The 4.0MK-80/50-400 diaphragm compressor is designed to compress various dry gases, except for oxygen, without contaminating them with oil or wear products from the rubbing parts. The 4.0MK-80/50-400 diaphragm compressor is widely used in laboratory research and production, as well as in the chemical, oil and gas chemical, and metallurgical industries. It is also used in the electrical, nuclear, and aerospace industries. The compressor is automated and does not require constant supervision. In case of malfunction, the emergency automation system activates and turns off the electric motor. The compressor is water-cooled.
At the customer's request, the diaphragm compressor can be installed in a block module or container.

Final pressure, MPa (kgf/cm2): 40 (400)

Initial pressure, MPa (kg/cm²): 5 (50)

Power Consumption, kW: 23

Compressed gas (ver. M1): Nitrogen (dry), Argon, Air (dry), Helium, Krypton, Xenon, Neon, Carbon dioxide (dry)

Compressed gas (ver. M2): Nitrogen (wet), Air (wet), Carbon dioxide (wet)

Compressed gas (ver. M3): Methane, Ammonia (dry), and other explosive non-corrosive gases as agreed with the manufacturer + ver. M1

Compressed gas (ver. M4): Carbon monoxide and other explosive corrosive gases as agreed with the manufacturer + ver. M2/M3

Capacity, m³/min: 1.3

Capacity, m³/hour: 80

Drive type: Electric motor

Cooling water consumption, m³/min: 1.56

LxWxH: 2150x950x1610

Weight, kg: 1680